:: INSCIN ::

Low Temperature Calibration Bath

Generally used for Calibrating thermocouples, thermometers, Indicators, Thermostat, RTD’S; Direct immersion test etc…

INSCIN’s- ISI 095… is available in four basic standard models based on the temperature

Technical Data:

Specification / Model No	ISI 095A	ISI 095B	ISI 095C	ISI 095D
Filling Volume	12 liters
Work Space	200x200x200 (d) mm
Temperature Range	-20° C to ambient	-40°C to ambient	-80°C to -20°C	-100° C to -80°C
Inner Tank	Stainless Steel 304 Grade
Outer	Mild Steel Powder coated
Temperature Controller	Digital Micro processor based PID controller
Display resolution	0.1°C
Display accuracy	0.5% Full Scale ±1 digit
Controlling Accuracy	±0.1°C ±1 digit
Stirrer	Fractional Horse Power Motor
Uniformity/Stability	±0.3°C
Sensor	Class A PT 100
Control Heating	1000 watts
Refrigeration System	Single Stage		Double Stage	Triple Stage
Refrigerant	CFC Free Refrigerant
Insulation	PUF
Media to be used	Methanol / IPA / Acetone
Power Consumption	1600 watts	2000 watts	2600 Watts	4000 watts
OPTIONAL	Work space can be given at different sizes on customer request Display with High Resolution (HR) of 0.01°C is available on request

INSCIN’s - Low Temperature Calibration Bath is with…

Temperature range -20°C / -40°C / -80°C.

Digital Microprocessor based temperature indicator cum controller - for easy operation.

Dual display to view the Processing & Set Value simultaneously.

Display resolution & Temperature controlling accuracy of ±0.1°C within the tank.

Class A, Three wire, PT 100 Sensor for accurate measurement of temperature.

Easy replaceable Stainless Steel immersion heaters with larger cold zone.

Automatic High Temperature safety cut-off to prevent samples from high temperature during malfunctioning.

Automatic Boost Heating to increase the liquid temperature faster.

Outer made of mild steel frame and side covers with powder coating – double color.

Inner tank made of Stainless Steel duly polished.

Stirrer with fractional horsepower motor for uniformity of temperature within the tank.

Built in long life, fully balanced, less noise refrigeration system with hermetically sealed compressor & air cooled condenser filled with CFC Free refrigerant

Single stage refrigeration for temperature up to -40°C & double stage cascade system for temperatures below -40°C.

PUF Insulation to prevent loss of temperature.

Wheels for floor models for easy movement.

Tray with required port holes.

Suitable to operate at 230VAC, 50Hz Single phase supply.

Optional

Calibration Certificate from NABL certified lab.

Display resolution of 0.01°C full range.

Controller with 0.01°C display resolution and controlling accuracy.

Smaller / Larger tanks.

* INSCIN has all rights to change the specification / design without any prior notice

<< Back